clusterConfig.yaml¶

apiVersion: provision.daocloud.io/v1alpha3
kind: ClusterConfig
metadata:
spec:
  clusterName: my-cluster

  # The domain name or IP address of the bootstrap node, by default resolves to the IP of the default gateway on the bootstrap node's network interface. You can manually enter an IP or domain name. If it is a domain name and unable to be resolved, an automatic mapping will be created between this domain name and the default IP of the bootstrap node.
  # bootstrapNode: auto

  # Configuration for bootstrap clusters, with default values below
  #bootstrap:
  #  # Container name for the Kind cluster
  #  instanceName: my-cluster-installer
  #  # Host path where the Kind cluster will be mounted
  #  resourcesMountPath: /home/kind
  #  registryPort: 443
  #  minioServerPort: 9000
  #  minioConsolePort: 9001
  #  chartmuseumPort: 8081

  loadBalancer:

    # NodePort (default), metallb, cloudLB (Cloud Controller is not supported currently)
    type: metallb
    istioGatewayVip: xx.xx.xx.xx/32 # Required when loadBalancer.type is metallb, providing UI and OpenAPI access for DCE
    insightVip: xx.xx.xx.xx/32 # Do not discard /32, required when loadBalancer.type is metallb, used as the Insight data collection entry point for the global cluster, where the insight-agent of sub-clusters can report data to

  # Specify SSH private key, no need to define ansibleUser and ansiblePass for nodes after defining this
  # privateKeyPath: /root/.ssh/id_rsa_sample

  masterNodes:
    - nodeName: "g-master1" # nodeName overrides hostName, should comply with RFC1123 standard
      ip: xx.xx.xx.xx
      ansibleUser: "root"
      ansiblePass: "dangerous"
      #ansibleSSHPort: "22"
      #ansibleExtraArgs: "" # "ansible_shell_executable='/bin/sh' ansible_python_interpreter='/usr/local/bin/python'" , format: "k='v'  k1='v1'  k2='v2' "
    - nodeName: "g-master2"
      ip: xx.xx.xx.xx
      ansibleUser: "root"
      ansiblePass: "dangerous"
      #ansibleSSHPort: "22"
      #ansibleExtraArgs: ""
    - nodeName: "g-master3"
      ip: xx.xx.xx.xx
      ansibleUser: "root"
      ansiblePass: "dangerous"
      #ansibleSSHPort: "22"
      #ansibleExtraArgs: ""
  workerNodes:
    - nodeName: "g-worker1"
      ip: xx.xx.xx.xx
      ansibleUser: "root"
      ansiblePass: "dangerous"
      #ansibleSSHPort: "22"
      #ansibleExtraArgs: ""
      nodeTaints:     # For the 7-node mode: At least 3 worker nodes should have a taint applied (only for ES nodes). If an external ES is used, there is no need to add this taint.
       - "node.daocloud.io/es-only=true:NoSchedule"
      # nodeLabels:
      #   daocloud.io/hostname: g-worker1
    - nodeName: "g-worker2"
      ip: xx.xx.xx.xx
      ansibleUser: "root"
      ansiblePass: "dangerous"
      #ansibleSSHPort: "22"
      #ansibleExtraArgs: ""
      nodeTaints:
       - "node.daocloud.io/es-only=true:NoSchedule"
      # nodeLabels:
      #   daocloud.io/hostname: g-worker2
    - nodeName: "g-worker3"
      ip: xx.xx.xx.xx
      ansibleUser: "root"
      ansiblePass: "dangerous"
      #ansibleSSHPort: "22"
      #ansibleExtraArgs: ""
      nodeTaints:
       - "node.daocloud.io/es-only=true:NoSchedule"
      # nodeLabels:
      #   daocloud.io/hostname: g-worker3

  # ntpServer:
    # - 0.pool.ntp.org
    # - ntp1.aliyun.com
    # - ntp.ntsc.ac.cn

  fullPackagePath: "/root/offline" # The path to the extracted offline package, this field is required in offline mode.

  osRepos: # OS source

    # Support official-service(default), builtin
    type: builtin
    isoPath: "/root/CentOS-7-x86_64-DVD-2009.iso"
    osPackagePath: "/root/os-pkgs-centos7-v0.4.4.tar.gz"

    # type: external
    # Set the block below only if target is S3-compatible storage which need to upload files automatically(e.g. minio).
    # isoPath: "/root/CentOS-7-x86_64-DVD-2009.iso"
    # osPackagePath: "/root/os-pkgs-centos7-v0.4.4.tar.gz"
    # externalRepoEndpoint: https://external-repo.daocloud.io
    # externalRepoUsername: rootuser
    # externalRepoPassword: rootpass123

    # type: external
    # Set the block below if target is other storage which cannot or does not need to upload automatically(e.g. nginx).
    # That requires you to import the required packages(iso, os-pkgs) manually if not all the required offline resources exist.
    # `centos` as CentOS, RedHat, kylin, AlmaLinux, Fedora or Openeuler
    # `debian` as Debian
    # `ubuntu` as Ubuntu
    # externalRepoType: centos
    # externalRepoURLs: ['https://extertal-repo.daocloud.io/kubean/centos/\$releasever/os/\$basearch/']

  imagesAndCharts: # Container registry and Chart repo source

    # official-service(default), builtin or external

    type: builtin

    # type: external
    # IP or domain name
    # externalImageRepo: https://external-registry.daocloud.io
    # Set user and password. Optional
    # externalImageRepoUsername: admin
    # externalImageRepoPassword: Harbor12345
    # chartmuseum or harbor
    # externalChartRepoType: chartmuseum
    # IP or domain name
    # externalChartRepo: https://external-charts.daocloud.io:8081
    # Set user and password. Optional
    # externalChartRepoUsername: rootuser
    # externalChartRepoPassword: rootpass123

  addonPackage: # offline package of app store addon, perform offline deployment for addon after this is defined
    # path: "/root/addon-offline-full-package-v0.4.8-amd64.tar.gz"

  binaries: # binary files

    # official-service(default), builtin
    type: builtin

    # type: external
    # IP or domain name
    # externalRepository: https://external-binaries.daocloud.io:9000/kubean

 #externalMiddlewares:
  #  database:
  #    kpanda:
  #      - dbDriverName: "mysql"
  #        # Please refer https://gorm.io/docs/connecting_to_the_database.html
  #        dataSourceName: "user:password@tcp(localhost:3306)/dbname"
  #        # readwrite(default) or readonly
  #        accessType: readwrite
  #        # The maximum number of open connections to the database.
  #        #maxOpenConnections: 100
  #        # The maximum number of connections in the idle connection pool.
  #        #maxIdleConnections: 10
  #        # The maximum amount of time a connection may be reused.
  #        #connectionMaxLifetimeSeconds: 3600
  #        # The maximum amount of time a connection may be idle.
  #        #connectionMaxIdleSeconds: 1800
  #    ghippoApiserver:
  #      - dbDriverName: "mysql"
  #        dataSourceName: "user:password@tcp(localhost:3306)/dbname"
  #    ghippoKeycloak:
  #      - dbDriverName: "mysql"
  #        dataSourceName: "user:password@tcp(localhost:3306)/dbname"
  #    ghippoAuditserver:
  #      - dbDriverName: "mysql"
  #        dataSourceName: "user:password@tcp(localhost:3306)/dbname"
  #  elasticsearch:
  #    insight:
  #      endpoint: "https://xx.xx.xx.xx:9200"
  #      # login with basic auth or bearer auth
  #      #anonymous: false
  #      # basic auth
  #      username: "username"
  #      password: "password"
  #  kafka:
  #    brokers:
  #      - host1:9092
  #      - host2:9092
  #    # the username and password of kafka is not necessary
  #    username: "username"
  #    password: "password"
  #  S3Storage:
  #    default:
  #      endpoint: "xx.xx.xx.xx:9000"
  #      # Set if you dont want to verify the certificate.
  #      insecure: true
  #      bucket: "bucketname"
  #      accessKey: "YOUR-ACCESS-KEY-HERE"
  #      secretKey: "YOUR-SECRET-KEY-HERE"

  # Examples as below. More refer to kubespray options setting documentations.
  # kubeanConfig: |-
  #  this config will set the timezone of nodes , and it won't change timezone if this config is commented out.
  #  ntp_timezone: Asia/Shanghai
  #  # Enable recommended node sysctl settings
  #  node_sysctl_tuning: true
  #  # Extra node sysctl settings while node_sysctl_tuning is enabled
  #  extra_sysctl: [{ name: net.ipv4.tcp_keepalive_time, value: 700 }]
  # bin_dir: /usr/local/bin
  # http_proxy: ""
  # https_proxy: ""
  # upstream_dns_servers:
  #   - 8.8.8.8
  #   - 8.8.4.4

  # k8sVersion only take effect in online mode, don't set it in offline mode.
  # Unless to install a non-latest k8s version with offline pkg in place.
  # k8sVersion: v1.25.4
  # auditConfig:
  #  logPath: /var/log/audit/kube-apiserver-audit.log
  #  logHostPath: /var/log/kubernetes/audit
  #  policyFile: /etc/kubernetes/audit-policy/apiserver-audit-policy.yaml
  #  logMaxAge: 30
  #  logMaxBackups: 10
  #  logMaxSize: 100
  #  policyCustomRules: >
  #    - level: None
  #      users: []
  #      verbs: []
  #      resources: []
  # network:
  #  cni: calico
  #  clusterCIDR: 10.233.64.0/18
  #  serviceCIDR: 10.233.0.0/18
  # cri:
  #  criProvider: containerd
  #  criVersion only take effect in online mode, don't set it in offline mode
  #  criVersion: 1.6.8
  # renewCerts: Certificate renewal for the cluster
  #  # There are only 2 modes of renewing certificates: `onetime` or `cyclical`, with the default value `cyclical`.
  #  # 1. When mode is set to `cyclical`, certificate renewal will be performed on a timer in a cyclical manner.
  #  mode: cyclical

  #  # 2. When mode is set to `onetime`, certificate renewal will be completed at once, and you can set the validity days of the certificate.
  #  mode: onetime
  #  # Valid days can be set when in `onetime` mode, with the default valid days being 3650.
  #  oneTimeValidDays: 3650

apiVersion: provision.daocloud.io/v1alpha3
kind: ClusterConfig
metadata:
   creationTimestamp: null
spec:
   clusterName: my-cluster
   masterNodes:
     # nodeName will override hostName, should conform to RFC1123 standard
     - nodeName: "g-master1"
       ip: xx.xx.xx.xx
       ansibleUser: "root"
       ansiblePass: "dangerous"
   workerNodes:
   fullPackagePath: "/root/offline"
   osRepos:
     # official-service(if omit or empty), builtin or external
     type: builtin
     isoPath: "/root/CentOS-7-x86_64-DVD-2009.iso"
     osPackagePath: "/root/os-pkgs-centos7-v0.4.4.tar.gz"
   imagesAndCharts:
     # official-service(if omit or empty), builtin or external
     # External S3 is not yet supported  … FIXME
     type: builtin
   addonPackage:
     path: "/root/addon-offline-full-package-v0.4.8-amd64.tar.gz"
   binaries:
     # official-service(if omit or empty), builtin or external
     type: builtin

apiVersion: provision.daocloud.io/v1alpha3
kind: ClusterConfig
metadata:
   creationTimestamp: null
spec:
   clusterName: my-cluster
   masterNodes:
     # nodeName will override hostName, should conform to RFC1123 standard
     - nodeName: "g-master1"
       ip: xx.xx.xx.xx
       ansibleUser: "root"
       ansiblePass: "dangerous"
   workerNodes:

   fullPackagePath: "/root/offline"
   osRepos:
     # official-service(if omit or empty), builtin or external
     type: external
     # Optional only if external repo already have full required resources
     isoPath: "/root/CentOS-7-x86_64-DVD-2009.iso"
     # Optional only if external repo already have full required resources
     osPackagePath: "/root/os-pkgs-centos7-v0.4.4.tar.gz"
     # `centos` as CentOS, RedHat, kylin AlmaLinux or Fedora
     # `debian` as Debian
     # `ubuntu` as Ubuntu
     externalRepoType: centos
     externalRepoURLs: ["https://extertal-repo.daocloud.io/centos/\$releasever/os/\$basearch/"]
   imagesAndCharts:
     # official-service(if omit or empty), builtin or external
     # Not Support External S3 so far... FIXME
     type: external
     # Optional only if external repo already have full required resources
     # IP or domain name
     externalImageRepo: https://external-registry.daocloud.io
     externalImageRepoUsername: admin
     externalImageRepoPassword: Harbor12345
     #chartmuseum or harbor
     externalChartRepoType: chartmuseum
     # IP or domain name
     externalChartRepo: https://external-charts.daocloud.io:8081
     externalChartUsername: rootuser
     externalChartMuseumPassword: rootpass123
   addonPackage:
     path: "/root/addon-offline-full-package-v0.4.8-amd64.tar.gz"
   binaries:
     # official-service(if omit or empty), builtin or external
     type: external
     # Optional only if external repo already have full required resources
     # IP or domain name
     externalRepository: https://external-binaries.daocloud.io:9000/kubean

apiVersion: provision.daocloud.io/v1alpha3
kind: ClusterConfig
metadata:
   creationTimestamp: null
spec:
   clusterName: my-cluster
   masterNodes:
     # nodeName will override hostName, should conform to RFC1123 standard
     - nodeName: "g-master1"
       ip: xx.xx.xx.xx
       ansibleUser: "root"
       ansiblePass: "dangerous"
   workerNodes:

# Official online:
./dce5-installergenerate-config --install-mode=cluster-create --master=1 --access-type=official-service
# Official online simplified version:
./dce5-installer generate-config --master=1

# Built-in offline:
./dce5-installer generate-config --install-mode=cluster-create --master=1 --access-type=builtin
# Built-in offline simplified version:
./dce5-installer generate-config --master=1 --access-type=builtin

# Extend offline:
./dce5-installer generate-config --install-mode=cluster-create --master=1 --access-type=external
# Extended offline simplified version:
./dce5-installer generate-config --master=1 --access-type=external

# Official online:
./dce5-installer generate-config --install-mode=cluster-create --master=3 --access-type=official-service
# Official online simplified version:
./dce5-installer generate-config --master=3

# Built-in offline:
./dce5-installer generate-config --install-mode=cluster-create --master=3 --access-type=builtin
# Built-in offline simplified version:
./dce5-installer generate-config --master=3 --access-type=builtin

# Extend offline:
./dce5-installer generate-config --install-mode=cluster-create --master=3 --access-type=external
# Extended offline simplified version:
./dce5-installer generate-config --master=3 --access-type=external

# Official online:
./dce5-installer generate-config --install-mode=cluster-create --master=3 --worker=3 --access-type=official-service
# Official online simplified version:
./dce5-installer generate-config --master=3 --worker=3

# Built-in offline:
./dce5-installer generate-config --install-mode=cluster-create --master=3 --worker=3 --access-type=builtin
# Built-in offline simplified version:
./dce5-installer generate-config --master=3 --worker=3 --access-type=builtin

# Extend offline:
./dce5-installer generate-config --install-mode=cluster-create --master=3 --worker=3 --access-type=external
# Extended offline simplified version:
./dce5-installer generate-config --master=3 --worker=3 --access-type=external

# Official online
./dce5-installer generate-config --install-mode=install-app --access-type=official-service
# Official online simplified version:
./dce5-installer generate-config --install-mode=install-app

# Built-in offline:
./dce5-installer generate-config --install-mode=install-app --access-type=builtin

# Extend offline:
./dce5-installer generate-config --install-mode=install-app --access-type=external